Milton Keynes Driveways & Landscaping 01908 104408 Free design
Painted swing gates between limestone piers at a house entrance in Olney

Driveway gates in Olney

Driveway gates for Olney's limestone houses, conservation streets and newer edge-of-town estates, with listed status and permission checked first.

5 yearWritten guarantee
FreeDesign before you commit
SamplesBrought to your door
Over 12Years experience

Automated swing gates in Olney typically cost £4,000–£8,000 supplied and fitted and automated sliding gates £5,000–£10,000, with the power supply priced on top. The important local point is heritage: Olney has 119 listed buildings and a long conservation area through the centre, so gates facing the road there, or on a listed house, can need permission.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Limestone, mostly free-draining
Guarantee
5 years, in writing

Guide prices from 2026 online price guides, at the higher end; your fixed price comes in writing after the free design visit. Planning rules checked October 2026.

Driveway gates in Olney

Driveway gates in Olney

Olney is a limestone market town with 119 listed buildings and a long conservation area running through the centre, with newer estates around the edge. Where you live in the town decides how a gate project starts. In the centre, the first questions are permission and appearance, because a gate there is seen as part of a historic street. On the estates, it is mostly about the width of the drive, the room to open or slide, and where the power supply will come from.

The conservation area's Article 4 direction for houses removes permitted development for extensions, alterations, porches and painting outside walls. Boundary walls are not on that list, but listed buildings and conservation areas have tighter rules generally, and gates facing the road in a conservation area can need permission. We check your address before designing anything, then use the free design visit to agree a gate, in aluminium or composite, that suits the house and the street.

Olney specifically

What makes Olney different

Olney sits on Great Oolite limestone, which generally drains better than Milton Keynes clay, so gate foundations here often go into firmer, drier ground. Clay bands and the Great Ouse valley along the south of the town change that locally, so we look before setting depths. The council's flood risk assessment notes a cluster of sewer flooding records in Olney, which we bear in mind when deciding where a motor, control box and cable duct go.

A typical job in the centre is a stone house with a yard or side entrance, where a pair of swing gates opening inwards suits the scale. On the newer estates it is usually a sliding gate or swing pair across a block-paved drive. Both involve posts or piers, a power run and fob or keypad control.

Sources: Milton Keynes Article 4 directions (Olney) · Olney Conservation Area map.

Milton Keynes City Council

Permissions and checks in Olney

  1. Step 1Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and conservation areas in Olney have tighter rules, so we check your address before anything is designed. Planning Portal: fences, gates and walls
  2. Step 2Trees in a conservation area need six weeks’ written notice before any work, and trees with a Tree Preservation Order need consent — both are free. Milton Keynes City Council: tree protection
  3. Step 3We check the ground and the planning position at the free design visit and give you one fixed written price.

Rules checked October 2026.

Why us

What you get in Olney

  • Listed status checked against Olney's 119 listed buildings
  • Article 4 and conservation area rules confirmed
  • Footings set on limestone, with clay bands checked
  • Equipment positioned with local drainage in mind
  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year written guarantee, transferable if you sell
A grey aluminium slatted sliding electric gate across the drive of a large buff brick detached house, block paving
★★★★★

“Connor and the team recently completed our resin driveway in Bletchley. From going through the design with us and even making pictures so we could see how it looked, to the install and the aftercare, it has all been perfect. Thanks again.”

Resin driveway — Bletchley

“Milton Keynes Driveways & Landscaping have just finished our full garden makeover in Milton Keynes. We had a porcelain patio, composite decking and raised sleeper beds. They arrived on time, kept my home clean and the garden looks terrific. They are coming back to do our block paved driveway soon.”

Full garden makeover — Milton Keynes
Questions

Driveway gates in Olney: questions

How much are driveway gates in Olney?
Automated swing gates in Olney typically cost £4,000–£8,000 supplied and fitted, and a new automated sliding gate £5,000–£10,000. For estate homes the power supply is often a short run from the garage; in the centre it can take more care, which is why it is priced on top. If you already have gates, automating them is usually £1,500–£3,000.
Does Olney's Article 4 direction cover gates?
The Article 4 direction removes permitted development for extensions, alterations, porches and painting outside walls. Boundary walls are not covered. Even so, listed buildings and conservation areas in Olney have tighter rules, and gates facing the road there can need permission, so we check your address first.
Is limestone ground good for gate posts?
Generally, yes. Great Oolite limestone drains better than clay and gives a firmer base. Clay bands do turn up locally, though, especially towards the Ouse valley, so we check the ground at each post position rather than assuming.
Can you automate the old gates we already have?
Often, if the gates and their hangings are sound. Automating existing gates is usually £1,500–£3,000 plus the power supply. We check the posts can take a motor and that the gates open inwards, then fit safety edges or photocells and force-test them.
Prices

What driveway gates cost

Our driveway gates cost guide breaks the price down: what is included, what changes it and what to check in any quote.

Free design visits across Olney

We measure up, check the ground, talk it through and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

Call 01908 104408 Free design