Milton Keynes Driveways & Landscaping 01908 104408 Free design
Oak-look composite swing gates between stone piers on a cottage frontage in Hanslope

Driveway gates in Hanslope

Driveway gates for Hanslope's stone cottages, Georgian and Victorian brick houses and later estates, built for slow-draining boulder clay.

5 yearWritten guarantee
FreeDesign before you commit
SamplesBrought to your door
Over 12Years experience

In Hanslope an automated sliding gate typically costs £5,000–£10,000 supplied and fitted and automated swing gates £4,000–£8,000, plus the power supply. The main local consideration is the conservation area: boundaries are generally stone or brick walls, panel fencing is normally resisted, and parking should avoid harming front gardens and verges, so a gate needs to suit that setting.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Slow-draining clay
Guarantee
5 years, in writing

Guide prices from 2026 online price guides, at the higher end; your fixed price comes in writing after the free design visit. Planning rules checked October 2026.

Driveway gates in Hanslope

Driveway gates in Hanslope

Hanslope's centre, around Church End, Market Square, The Green, High Street and Gold Street, has 17th and 18th-century stone and thatch cottages and Georgian and Victorian brick, all under the spire of St James the Great. The conservation area review says boundaries here are generally stone or brick walls. A driveway gate in that setting usually hangs between piers in an existing wall, and getting the piers right matters as much as the gate.

Around the centre are late 20th-century estates where frontages are more open and a gate is a simpler design job. In both cases we start with a free design visit, measure the opening and the room to open or slide, and recommend what suits the plot and the house. We fit aluminium and composite gates with automation, keypads, intercoms and fobs, and force-test the safety devices on every automated gate before handover.

Hanslope specifically

What makes Hanslope different

Boulder clay over Blisworth limestone means the top layer is usually clayey and slow to drain. Gate posts in that ground need foundations that allow for clay movement, especially near trees, and we check what is under the topsoil before fixing depths. In the conservation area, the review resists close-boarded or panel fencing and asks that parking avoids harming front gardens and verges, so we keep gate works within the existing opening where possible. There is no Article 4 direction on unlisted houses, but gates facing the road in the conservation area can need permission.

A typical job in the old centre is a stone or brick cottage with a wall to the street, where we build piers and hang a pair of swing gates opening inwards. On the later estates it is more often a sliding gate across a block-paved drive, with posts, a power supply and fob control.

Sources: Hanslope Conservation Area review.

Milton Keynes City Council

Permissions and checks in Hanslope

  1. Step 1Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and conservation areas in Hanslope have tighter rules, so we check your address before anything is designed. Planning Portal: fences, gates and walls
  2. Step 2Trees in a conservation area need six weeks’ written notice before any work, and trees with a Tree Preservation Order need consent — both are free. Milton Keynes City Council: tree protection
  3. Step 3We check the ground and the planning position at the free design visit and give you one fixed written price.

Rules checked October 2026.

Why us

What you get in Hanslope

  • Piers built to suit stone and brick walls
  • Gate works kept off front gardens and verges
  • Footings allowing for clay movement near trees
  • Conservation and listed status checked first
  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year written guarantee, transferable if you sell
A grey aluminium slatted sliding electric gate across the drive of a large buff brick detached house, block paving
★★★★★

“Connor and the team recently completed our resin driveway in Bletchley. From going through the design with us and even making pictures so we could see how it looked, to the install and the aftercare, it has all been perfect. Thanks again.”

Resin driveway — Bletchley

“Milton Keynes Driveways & Landscaping have just finished our full garden makeover in Milton Keynes. We had a porcelain patio, composite decking and raised sleeper beds. They arrived on time, kept my home clean and the garden looks terrific. They are coming back to do our block paved driveway soon.”

Full garden makeover — Milton Keynes
Questions

Driveway gates in Hanslope: questions

What does an electric gate cost in Hanslope?
In Hanslope, expect around £5,000–£10,000 for a new automated sliding gate on an estate drive and £4,000–£8,000 for an automated swing pair between walls in the old centre, both supplied and fitted. Putting a motor on gates you already have is usually £1,500–£3,000. Power supply is priced separately, and you get the fixed figure in writing after our free visit.
Do I need planning permission for gates in Hanslope?
Listed buildings and conservation areas in Hanslope have tighter rules, so we check your address before anything is designed. There is no Article 4 direction on unlisted houses, and outside the conservation area gates are normally permitted development up to 2m, or 1m next to a road used by vehicles.
Can a gate go in our stone wall?
Usually, with the right piers. The conservation area review says boundaries here are generally stone or brick walls, so we build piers that match and are strong enough for the gate's weight and motor, rather than hanging a heavy leaf off old masonry.
Does Hanslope's clay affect a sliding gate?
It affects the base. Boulder clay is slow to drain and moves with the seasons, so we build the track foundation to stay level and avoid leaving water standing around it. That keeps the gate running smoothly and the safety settings consistent.
Prices

What driveway gates cost

Our driveway gates cost guide breaks the price down: what is included, what changes it and what to check in any quote.

Free design visits across Hanslope

We measure up, check the ground, talk it through and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

Call 01908 104408 Free design