Milton Keynes Driveways & Landscaping 01908 104408 Free design
Black aluminium swing gates between brick piers with half-round copings in Newport Pagnell

Driveway gates in Newport Pagnell

Driveway gates for Newport Pagnell homes, from Georgian High Street plots to newer estates, designed around brick walls, copings and Castle Meadow's rules.

5 yearWritten guarantee
FreeDesign before you commit
SamplesBrought to your door
Over 12Years experience

Automated swing gates in Newport Pagnell typically cost £4,000–£8,000 supplied and fitted, and automated sliding gates £5,000–£10,000, with the power supply priced on top. The local point to know first is Castle Meadow, where a separate Article 4 direction covers walls, fences and gates, so new gates there need planning permission.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Varies street to street
Guarantee
5 years, in writing

Guide prices from 2026 online price guides, at the higher end; your fixed price comes in writing after the free design visit. Planning rules checked October 2026.

Driveway gates in Newport Pagnell

Driveway gates in Newport Pagnell

In Newport Pagnell, gates are often tied into an existing brick wall. The conservation area review asks owners to keep brick boundary walls with their triangular or half-round copings, and that applies on streets such as Mill Street, Silver Street and Tickford Street where Victorian villas and terraces line up behind them. A good gate here meets the wall properly, with posts or piers that look like they belong rather than something bolted on later.

At Castle Meadow, a separate Article 4 direction covers walls, fences and gates, so they need planning permission there. Elsewhere the normal rules apply, and on estates built from the 1980s onwards a gate is usually a straightforward design job. Either way, we start with a free design visit, measure the opening and the room behind it, and recommend sliding or swing based on your drive and how you use it, not a brochure.

Newport Pagnell specifically

What makes Newport Pagnell different

The centre stands on a knoll of Oxford Clay that grades down to Kellaways sands, river gravels and alluvium beside the Ouse and Ouzel. Drainage and firmness change sharply over a short distance, and groundwater is higher near the rivers. For a gate, that means one post can sit in clay and the other in sandier ground, so we look at both before fixing the footings. Land either side of both rivers is liable to flood, so on low-lying plots we keep the motor and controls off the lowest ground.

A typical job is a Victorian or Georgian-era house with an existing brick wall and a vehicle opening, where we build or repair piers to suit the coping and hang a pair of swing gates opening inwards. On the 1980s and newer estates it is more often a single sliding gate across a block-paved drive with a power run from the garage.

Sources: Newport Pagnell Conservation Area review.

Milton Keynes City Council

Permissions and checks in Newport Pagnell

  1. Step 1Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. At Castle Meadow a separate Article 4 direction covers walls, fences and gates, so they need planning permission there. Planning Portal: fences, gates and walls
  2. Step 2Trees in a conservation area need six weeks’ written notice before any work, and trees with a Tree Preservation Order need consent — both are free. Milton Keynes City Council: tree protection
  3. Step 3We check the ground and the planning position at the free design visit and give you one fixed written price.

Rules checked October 2026.

Why us

What you get in Newport Pagnell

  • Castle Meadow Article 4 checked before design
  • Piers detailed to suit triangular or half-round copings
  • Each post footing set for the ground it actually sits in
  • Controls kept off low ground near the Ouse and Ouzel
  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year written guarantee, transferable if you sell
A grey aluminium slatted sliding electric gate across the drive of a large buff brick detached house, block paving
★★★★★

“Connor and the team recently completed our resin driveway in Bletchley. From going through the design with us and even making pictures so we could see how it looked, to the install and the aftercare, it has all been perfect. Thanks again.”

Resin driveway — Bletchley

“Milton Keynes Driveways & Landscaping have just finished our full garden makeover in Milton Keynes. We had a porcelain patio, composite decking and raised sleeper beds. They arrived on time, kept my home clean and the garden looks terrific. They are coming back to do our block paved driveway soon.”

Full garden makeover — Milton Keynes
Questions

Driveway gates in Newport Pagnell: questions

How much are electric gates in Newport Pagnell?
Budget £4,000–£8,000 for automated swing gates supplied and fitted in Newport Pagnell, or £5,000–£10,000 for a new automated sliding gate. Where the gates hanging between your piers are sound, automating them is usually £1,500–£3,000. New piers and the power supply are priced on top, with a fixed written quote after the design visit.
Do I need planning permission for gates at Castle Meadow?
Yes. At Castle Meadow a separate Article 4 direction covers walls, fences and gates, so they need planning permission there. Elsewhere, gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles, unless the house is listed or the gate faces the road in the conservation area.
Can you hang gates on our old brick wall?
Sometimes, but an old wall is rarely built to carry a heavy automated leaf. We usually build new piers or posts designed for the gate's weight and the motor, finished to suit the wall and its coping, which the conservation area review asks owners to keep.
Why might the two gate posts need different foundations?
Newport Pagnell's ground grades from Oxford Clay to Kellaways sands and river gravels over short distances. If one side of the opening is clay and the other sandier, we size each footing for its own ground so the gate stays square as the seasons change.
Prices

What driveway gates cost

Our driveway gates cost guide breaks the price down: what is included, what changes it and what to check in any quote.

Free design visits across Newport Pagnell

We measure up, check the ground, talk it through and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

Call 01908 104408 Free design