Milton Keynes Driveways & Landscaping 01908 104408 Free design
Inward-opening rear gate on a Wolverton back way behind a Victorian brick terrace

Driveway gates in Wolverton

Driveway and rear-access gates for Wolverton's Victorian railway terraces, with the town's Article 4 frontage rules checked before anything is designed.

5 yearWritten guarantee
FreeDesign before you commit
SamplesBrought to your door
Over 12Years experience

Gates in Wolverton cost the same as elsewhere: automated sliding gates typically £5,000–£10,000 fitted, automated swing gates £4,000–£8,000, and automating existing gates usually £1,500–£3,000, plus the power supply. The deciding local factor is the Article 4 direction, which covers front walls and the road-facing side of houses in the conservation area, so front gates need planning permission while rear gardens off the back ways are not affected.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Varies street to street
Guarantee
5 years, in writing

Guide prices from 2026 online price guides, at the higher end; your fixed price comes in writing after the free design visit. Planning rules checked October 2026.

Driveway gates in Wolverton

Driveway gates in Wolverton

Wolverton was built as a railway town from 1838, and its grid of terraces leaves little room at the front: many houses sit right on the pavement, and later streets have just a low brick wall and a small yard. Where there is space for a vehicle, it is often at the back, reached along the back ways. So in Wolverton, a gate conversation often starts at the rear of the house rather than the street.

That suits the planning picture too. The conservation area's Article 4 direction covers the road-facing side of houses, including front walls and new hard surfaces at the front, so anything there needs planning permission. Rear gardens off the back ways are not affected. On the free design visit we look at both the front and the back, tell you plainly what each would involve, and price the option that actually works for your plot.

Wolverton specifically

What makes Wolverton different

The town sits on limestone of the Great Oolite group, the local Blisworth stone, under patches of boulder clay, and drainage changes from street to street. For gates, that means post foundations can meet firm stone in one yard and soft clay in the next, so we dig and look rather than assume. The Great Ouse flood plain lies north of the town, with the terraced core above it. Outside the conservation area, normal rules apply: gates up to 2m, or 1m next to a road used by vehicles, never opening outwards over the footway or road.

A typical Wolverton job is a terrace with a rear yard opening onto a back way. The opening is usually narrow, so a single swing leaf opening inwards or a short sliding gate works best. Work often includes new posts within the boundary, a power run from the house and fobs or a keypad, rather than anything on the street front.

Sources: Wolverton Conservation Area review · Milton Keynes Article 4 directions.

Milton Keynes City Council

Permissions and checks in Wolverton

  1. Step 1Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Wolverton’s Article 4 direction covers the road-facing side of houses, including front walls and new hard surfaces at the front, so anything there needs planning permission; back gardens are not affected. Planning Portal: fences, gates and walls
  2. Step 2Trees in a conservation area need six weeks’ written notice before any work, and trees with a Tree Preservation Order need consent — both are free. Milton Keynes City Council: tree protection
  3. Step 3We check the ground and the planning position at the free design visit and give you one fixed written price.

Rules checked October 2026.

Why us

What you get in Wolverton

  • Article 4 frontage check before any front gate is designed
  • Rear gates off the back ways, which Article 4 does not cover
  • Footings set after seeing whether we hit limestone or clay
  • Narrow-opening sliding and single-leaf options
  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year written guarantee, transferable if you sell
A grey aluminium slatted sliding electric gate across the drive of a large buff brick detached house, block paving
★★★★★

“Connor and the team recently completed our resin driveway in Bletchley. From going through the design with us and even making pictures so we could see how it looked, to the install and the aftercare, it has all been perfect. Thanks again.”

Resin driveway — Bletchley

“Milton Keynes Driveways & Landscaping have just finished our full garden makeover in Milton Keynes. We had a porcelain patio, composite decking and raised sleeper beds. They arrived on time, kept my home clean and the garden looks terrific. They are coming back to do our block paved driveway soon.”

Full garden makeover — Milton Keynes
Questions

Driveway gates in Wolverton: questions

How much is a driveway gate in Wolverton?
Prices don't change for Wolverton: automated swing gates £4,000–£8,000 supplied and fitted, an automated sliding gate £5,000–£10,000. Narrow rear openings with a usable gate already in place can often just be automated, usually for £1,500–£3,000. The power run comes on top, and the free design visit gives you a fixed written figure.
Can I put gates on the front of my house in Wolverton?
In the conservation area, the Article 4 direction covers the road-facing side of houses, including front walls and new hard surfaces at the front, so anything there needs planning permission. Back gardens are not affected. We check which applies to your address before designing.
Can a gate on a back way open outwards?
Gates must not open outwards over a footway or road, so we design rear gates to open inwards or slide along the inside of the boundary. On narrow back ways that is often the better arrangement anyway, because it keeps the lane clear.
Why do you need to dig before fixing the gate design?
Wolverton's ground changes from street to street, with Blisworth limestone in places and boulder clay in others. Post foundations for a heavy, motorised gate depend on what is actually there, so we check the ground on the visit and size the footings to suit.
Prices

What driveway gates cost

Our driveway gates cost guide breaks the price down: what is included, what changes it and what to check in any quote.

Free design visits across Wolverton

We measure up, check the ground, talk it through and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

Call 01908 104408 Free design